Full 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Before
After
Before
After
Before
AfterClopay Weather Seal Replacement: The Bastrop Owner’s Guide
If your Clopay garage door weather seal is cracked, flattened, or pulling away from the bottom, we stock the replacement and can usually install it the same day. In most Bastrop homes, a complete Clopay weather seal replacement runs between $70 and $150 installed, depending on your door width and whether we’re swapping just the rubber or the entire aluminum retainer too. Most folks discover the problem the hard way: sunshine beaming under the door, a puddle after a Hill Country downpour, or a snake skin in the corner where the gap used to be small.
That bottom seal is the workhorse of your door. It takes the full weight of the door every single close, and after a few Bastrop summers, the rubber dries out and stops doing its job. The good news is it’s a fast fix. The better news is you don’t have to live with the gap.
Key Takeaways
- We stock Clopay-compatible T-style and bulb-style bottom seals for nearly every residential Clopay model sold in the last 20 years.
- Installed replacement in Bastrop typically runs $70-$150 for the bottom seal, frame seals, or both.
- Same-day service from the truck is common - the seal rides with us on most calls.
- A live person answers at (737) 260-7243, even at nine at night.
Which Clopay Models This Applies To
Clopay builds three main residential lines you’ll find around Bastrop County: the economy steel doors, the mid-grade steel with insulation, and the premium wood-look or fiberglass doors like the Coachman and Gallery series. The bottom seal on all of them slides into a T-shaped aluminum channel, which is the same profile Clopay has used for decades. That means if your door was built anytime from the mid-1990s onward, we can match the seal without guesswork.
The gotcha comes down to size. The T-channel on Clopay doors measures 1/4 inch across the top of the T, and the bulb below runs 2, 3, or 4 inches tall depending on how flat your concrete sits. We measure that channel and the gap at the slab before we hand you a price. OEM Clopay seals are solid, but the aftermarket equivalents we stock from vinyl and EPDM rubber outlast OEM by a year or two in full western sun, and they cost less. We’ll tell you which one earns its keep for your door, because there’s no point putting a premium seal on a door that’s due for retirement anyway.
We also keep Clopay frame seals, jamb seals, and top seals on the truck for when the bottom isn’t the only place air and bugs are getting through. We’re an independent shop, so we’re not tied to Clopay’s catalog. That means we match what works, stock what holds up, and stand behind it for 90 days in writing.
Signs Your Clopay Weather Seal Replacement Is Failing
- You can see daylight under the door. That’s the obvious one. If light gets under, water, dust, and bugs get under. The rubber has lost its spring, and once it’s flat, it’s done.
- A gap at one corner only. This usually means your concrete settled or the door is slightly out of level. The existing seal hasn’t necessarily failed, but it can’t bridge the new gap. We may shim the retainer or step up to a taller bulb seal.
- Cracking or crumbling edges. Bastrop’s UV load and sporadic humidity bake rubber hard. When you bend the seal by hand and it splits instead of flexing, it’s living on borrowed time.
- Water or leaves gathering inside near the door. The seal isn’t just cosmetic. If stormwater pools inside your garage, your bottom seal has given up the fight and needs replacement before the water finds your stored boxes.
- Pest sign - snake skins, roach frass, mouse droppings. The gap under the door doesn’t need to be big to let a copperhead or a field mouse in. A few inches of worn seal is a welcome mat out where Bastrop backs up to the piney woods.
Replacement Cost & What’s Included
Here’s the straight pricing picture for Bastrop. For a standard single or double Clopay residential door, a weather seal replacement runs $70 to $150 installed. That covers the seal itself, matching the retainer if yours is bent or corroded, and our labor to pull the old one out, clean the channel, and seat the new one so it meets the slab evenly across the full width.
Here’s what drives the range:
- Door width: A 16-foot double door uses nearly twice the material of a 9-foot single. Straight material cost.
- Retainer condition: If the aluminum channel is bent or has screws stripped out, we swap it. That adds a few dollars in parts but saves you another call six months from now.
- Seal type: Standard rubber gets it done. EPDM synthetic lasts longer in direct afternoon sun and only costs a little more. We’ll quote both if there’s a meaningful difference for your exposure.
You’ll know the price before we start. No surprises, no “well, it turned out to be bigger than we thought.” The number quoted on the phone is the number on the invoice. And every job carries our 90-Day Done Right Promise: if it leaks, sags, or pulls loose within three months, one call brings us back with no charge and no runaround.
DIY or Call Us?
Replacing a Clopay bottom seal isn’t dangerous - it’s not a spring job. You can slide the old rubber out and the new one in with a pair of pliers and some soapy water. But here’s what separates a seal that lasts five years from one that fails next spring: getting the retainer squared to the slab and making sure the seal compresses evenly across the entire width. We measure the gap in six places. Most folks check the middle and call it good, and that’s where the corner gap comes from three months later.
You can absolutely do the swap yourself if you want to. But if you’d rather have it fitted right once, along with a 90-day guarantee in writing, call (737) 260-7243. We’ll tell you the price on the phone and hold it at your door.
FAQs
A good seal lasts four to seven years on a door with afternoon sun exposure, less if the door is painted dark or the concrete is rough. If you’re replacing more often than that, we should look at what’s chewing up your seals - usually a track height or slab issue, and the fix is cheaper than a third new seal. Call (737) 260-7243 and we can tell you over the phone which one you’re dealing with.
No, and nobody honest will tell you otherwise. Seals wear by losing their flex and height. You can’t glue flexibility back into dead rubber. Replacement is the repair. Call (737) 260-7243 for a real quote and we’ll have you sealed up the same day.
Usually 30 to 45 minutes for a straight seal replacement, and we carry the common sizes on the truck. If your retainer needs replacement too, figure an hour to an hour and a half. Call (737) 260-7243 and we’ll tell you if we can swing by today.
Yes. We stock T-style bottom seals, brush seals, and the common Clopay frame seals for doors from the last 20 years. If you have an unusual width or a custom wood door, we’ll special-order it and you’ll know the lead time on the phone, not later. Call (737) 260-7243 and tell us the door width and we can tell you if we can fix it today.
Call Otto’s Garage Door for Clopay Seal Replacement in Bastrop
We’ve been working doors since 2004, long enough to know which Clopay seals hold up out here and which ones a coil of east Texas heat will roast by July. Otto Reinhardt owns the company and answers the phone, and when the name on the van is the name on the invoice, the guarantee actually means something. Whether your door is letting in rain, bugs, or just a wedge of hot air, call (737) 260-7243 to get an honest price from a live person, not a call center. Tell me what it’s doing and I’ll tell you what it needs - no guesswork, no runaround.
Written by Otto Reinhardt, Owner, Otto’s Garage Door - Bastrop, TX at Otto’s Garage Door, serving Bastrop and nearby areas.